Debris Removal Coming from Rooftops and also High Rise Buildings – Any Cost-Effective Substitute for Dumpsters.

July 9, 2020 Other  No comments

Removing debris from tall structures and high-rise buildings safely, efficiently and cost-effectively is quite challenging. While metal dumpsters may be suitable for getting rid of walk out debris on construction sites, they’re way fat, cumbersome and bulky to be hoisted on rooftops or even to clear debris located several stories above ground.

Using chutes to slide debris into a dumpster isn’t the best solution either for all reasons. First, maintaining chutes in good working order is labor intensive and requires frequent repairs as a result of friction, tearing, and damage that sharp objects and abrasive materials commonly found in industrial debris could cause to the chute fabric while they slide down. Additionally, dumping debris down a chute from an elevation generates lots of airborne particles, dust and pollution that may present a significant health hazard to workers and the overall public.

Fortunately, you can find new special debris removal dumpster bags in the marketplace that are perfectly fitted to this job and are suitable for the roofing and construction industry. These lightweight dumpster bags weigh under 10 lbs and measure roughly 36″ in width, length and height respectively. They are frame-less, self-standing and unlike other flexible dumpsters and traditional metal containers available in the marketplace, they’re so light and compact, that they’ll easily be deployed by one individual in less than 5 minutes on any rooftop, even on the tallest high rise buildings.

Despite their compact size, these reusable FIBCs (Flexible Intermediate Bulk Containers) can haul amazing quantities of debris from roof tops over and once again without falling apart. With a loading capacity of 2,200 lbs and a volume capacity of 27 cubic feet, they could hold virtually any kind of abrasive or sharp material generated on a building site, including jumbo sized debris such as for instance broken glass, torn metal, splintered wood, sheet-rock, cement chunks and much more. Because they are made from woven polypropylene, these dumpster bags are rip resistant and will not burst open even when the bags are punctured while being lowered to the bottom by crane or while suspended in mid air. The straps that support these specialized FIBC bags are even tougher odvoz odpadu. They are made to withstand 6,000 lbs of pressure and are made from the exact same type of nylon material employed by car manufacturers for seat belts.

Additionally, these special FIBC bags are designed with a safe and user friendly dump bottom mechanism. This gives them a significant edge with regards to discharge rate. Once a case is full of debris and lowered to walk out, its contents may be quickly emptied in to a traditional dumpster or perhaps a truck by simply releasing a couple of straps. This forces the bottom of the bag to spread available and the contents to spill out as the crane lifts the bag back as much as the rooftop for another load.

These bags are fully customizable. Upon request producer can modify them to suit a customer’s specific needs. Including altering how big is bags in addition to the number of straps for added support. Needless to say, the bags aren’t just useful for removing debris from rooftops. They are also perfectly fitted to removing debris at walk out, on steep inclines as well as below ground.

The maker of those specialized debris removal bags is supplying a free sample bag with the purchase of three or more bags, so if you’re starting a brand new construction, remodeling or renovation project and you’ll need a cost-effective option to traditional metal dumpsters take full advantage of their free sample and compare how fast and efficiently you can clear debris from a site with one of these new and improved flexible dumpster bags.

Leave a reply

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>